• Know About Iranian Architecture

    Comments Off on Know About Iranian Architecture
    May 10, 2020 /  Architecture

    Iranian architecture displays a class and elegance that cannot be matched with any other style of architecture and design. It is quite distinct from that of Muslim countries. The major features of Iranian architecture are: structural ingenuity basically in vault and dome construction; a skill of decoration with freedom and intricacy incomparable to any other form of architecture.

    The pre-Islamic buildings include the remarkable Elamite ziggurat at Chogha Zanbil. Baked brick was used for outer surfaces by the 12th century BC. Most of the greatest buildings were built with a religious purpose, and even in secular buildings religious influences are entirely absent. Palaces were present, and their shapes, sizes and colors varied according to the ruling dynasty.

    The first great development of ancient Persian architecture took place under the Achaemenid dynasty during the Persian Empire, from about 550 to 330 BC. There are numerous remains of Achaemenian period, including two palaces, a sacred precinct, a citadel, a tower, and the tomb of Cyrus.

    Royal architecture under the Achaemenid also included tombs cut in solid rock, of which the best-known examples are those at Naqshah Rostam near Persepolis. Little is known of the popular building practices of the period, but archaeologists believe that the ordinary dwelling was made of mud brick. After the conquest of Persia by Alexander the Great, Greek influence, in its late, Hellenistic phase, was predominant in the arts of Persia. Examples include fragments of bronze sculpture found at Shami, and the Parthian sculptural reliefs at Behistun.

    During the Islamic period “mosques” became the major buildings in Iranian architecture. Outstanding examples of early Islamic Iranian architecture include the Mosque of Baghdad built in 764, the Great Mosque at Samarra erected in 847, and the early 10th-century mosque at Nayin.

    After the 17th century, Iranian artists copied European paintings and engravings, and the native traditions declined. But Iranian architecture still managed to leave a huge impact on the world.

  • Flexpod Net App – Innovative and Dominant Reference Architecture

    Comments Off on Flexpod Net App – Innovative and Dominant Reference Architecture
    April 30, 2020 /  Architecture

    The converged infrastructure market finds the flexpod net app very innovative and dominant reference architecture. This data center platform from NetApp and Cisco has found appreciation from users worldwide. Many of these users choose to standardize it for mission-critical applications. This was introduced in the year 2010 and has left many impressed owing to its excellent features. The flex pod netapp scores the brownie points in terms of performance, scalability and availability. They can be found in different packages and are easy to deploy and manage. It won’t be out of context to say, they have created a buzz in the IT world worldwide. The availability of flexpodnetapp is the result of a business collaboration entered between Cisco and NetApp. Their joint efforts have been to enhance capabilities and add broader support to important applications. This is done to ensure the FlexPod is able to meet broadest possible range of IT requirements so that most business-critical applications can be run smoothly. They have been credited for supporting various types of data operating systems and virtualization of databases. Likewise, they have made efforts to address various infrastructure needs in the small and medium-sized entities. These enhancements have given the flexpodnetapp an edge in terms of higher-levels of integration. It has facilitated data centers to interconnect by offering them suitable equipment. This has, in a way, made it easy for entities to either scale up or scale out the performance. They have made storage virtualization simple which in turn has made business data management very easy. It also minimizes total cost of ownership dramatically. The technology used helps in logical demonstration of data as per requirements of virtual storage pools. In a sense, it allows you to focus on critical business applications rather than devote time on complexity of the hardware. The storage virtualization capacities come at various levels of storage hierarchy. This can be seen on all storage platforms. The network provisions are flexible and service providers can regulate flexpodnetapp depending on their needs for a specific period of time. This has given them the edge over other available options. Their biggest contribution has been its ability to provide service to more than 1000 servers. Of course, service providers interested to avail their services need to use Flex Pod in order to optimize their functioning. Flex Pod customers are proud to own one as it enables them to enjoy cloud management solutions. Its phenomenal success has prompted Cisco and NetApp to offer multiple data centre architectural designs. This has been accomplished with help of NetApp Cisco Flex pod project.

  • BIM Modeling- Adding Technical Advantages to Construction and Architecture

    Comments Off on BIM Modeling- Adding Technical Advantages to Construction and Architecture
    April 22, 2020 /  Architecture

    With the extensive advancements in technology, the process of construction and architecture have become more organized and streamlined. A highly precision and technology driven process, BIM modeling consists of steps for generating as well as managing digital blueprints of a building, irrespective, of its nature whether a factory, hotel, office or any other form of physical structure. The process of digitizing important data relevant to the construction of a building, aids decision-makers to make critical judgments and evaluations about modification across its lifespan including in habitation, operation, and demolition. It is now highly appreciated by architects, civil engineers, constructors and others occupied in construction of a building and infrastructure sector across the globe.

    To carry out the entire project management in an effective manner, a BIM Manager or a VDC Project Manager takes control of the entire process. In projects, they work in co-ordination with Design Construction Team on behalf of the client. However, companies are also hiring BIMs at different stages of the project delivery and handling. Thus, the intensive level of dynamism and ease of customization provided by converting these important data into a suitable digital format, construct multifunctional structure on the surface. The engineering solutions offered by expert companies are now preferred by every construction firm for their projects.

    A revelation to traditional building design systems that were initially dependent on two-dimensional drawings of building sections, plans, elevation and other parts, digitization of maps offers numerous advantages. It offers updated technology which include the 3D maps and introduction of factors such as time and cost as an essential part of the project data, the other two important dimensions to modern day digitized maps of home and offices.

    It not only included, geometric calculations into building maps but also comprised of other factors as mention of surface space, geographic study, building material study, ergonomics, green building, light analysis, etc. which were neglected earlier. This provides an efficient solution for building construction in the hands of architects and engineers.

    Many companies specializing in Engineering Design Services ensure that they make use of this sophisticated technology to offer customized solutions as per the construction concepts, ideas, and design requirements put forth by clients. The design tool of this building solution presents the different views of a building model for construction and other usages of the building. In this model, a slight change in a one object of the model or design, automatically, changes other dependent model and an architect do not need to break model for every change.

    The author is an experienced Content writer and publisher for Business Development. Visit us to know more about Engineering Design Services, BIM modeling and Digitization of maps.

  • Multisynth-based Architecture

    Comments Off on Multisynth-based Architecture
    April 15, 2020 /  Architecture

    Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
    Equation: fOUT = fIN.N/P.R
    Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

    New Any-Rate Clock Multiplier Architecture Simplifies Design
    Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

    MultiSynth Technology
    The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

  • Architecture meets Industrial Design

    Comments Off on Architecture meets Industrial Design
    April 8, 2020 /  Architecture

    Title: Architecture meets Industrial Design

    Text & Photography: Foster + Partners

    Blurring the lines between architecture, interior design and industrial design, F+P once again prove that design is seamless and universal

    Foster+Partners has proved its design prowess beyond the building industry and carries it forward to designing the interiors and furnishings for a commercial aircraft, drawing on its previous commissions for yachts and private jets.

    Following the successful refurbishment of The Wing, Cathay Pacific’s flagship lounge at Hong Kong International Airport, the practice has carried the lounge’s sophisticated design into the first class cabin of the Boeing 777-300ER fleet refreshing the award-winning cabin.

    The Wing, which opened earlier this year,is the second in a series of lounges by Foster + Partners for Cathay Pacific at HongKong International Airport. Every detail of the interiors,from the Champagne Bar to the bathroom fittings in the luxurious first class -cabanas’, has been custom-designed by the practice to create an exceptional experience for guests.

    Besides the plush interiors, the lounges are furnished with a number of unique pieces designed by Foster + Partners, including a marble reception desk,food counter and a free-standing champagne bar with integrated trays – down to the detail of porcelain plates. Alongside the bespoke products and one-off furniture pieces, The Wing also features the Ilium cylindrical table light, developed with Nemo and the Foster 503 armchair by Walter Knoll.The highlight is the Cathay Solus Chair, the airline’s signature developed with Poltrona Frau that responds to the desire for privacy in the midst of a busy public space with its hourglass form and multi-utility constitution: the circular form incorporates a wide,comfortable seat, an integrated a power supply and a table, which can be used as an informal desk. The ribs of cushion at the back of the chair extend in places to form ridges, which can be used as armrests.

    Creating a seamless experience for passengers, the cabin’s design shares the lounge’s palette of warm white leather,reflective dark grey surfaces and walnut finishes to create a calm, understated interior. Every element is considered and refined, including the stitch of the bespoke covers for Cathay Pacific’s celebrated first class seat, the handmade woollen carpet, the refurbished bathrooms and the new reading light, which has been custom-designed to cast fewer shadows when working or dining.

    to view images click on globalhop.indiaartndesign.com

  • Crystal Soil For Indoor Floral Arrangement

    Comments Off on Crystal Soil For Indoor Floral Arrangement
    April 6, 2020 /  Architecture

    Water Crystals is another name for Crystal Soil aka Water gel beads, crystal mud, or waterbeads.Water Crystals is a water absorbent polymer that is translucent, odourless, bio-degradable, 100% non-toxic, re-usable,stainless and environmentally friendly.

    It has various uses including Floral and candle arrangements and can be used in the home, office or at events,weddings and other functions.It costs a fraction of the cost of marbles and comes in assorted colours. The different colours are derived from food dye. When soaked in water it can inflate to more than 100 times its original size.

    Because water crystals come in assorted colours you can select the colours that match your home decoration such as your curtains, sofa, walls. Of course you need a clear vase or bowl.You can either use one colour,layer different colours or mix various colours together. One of my favourite combinations is when yellow is mixed with clear Crystals.What about Clear and Red layered on top of each other? It would certainly fit the motif of Christmas decorations. But water crystals are for everyday use and not just for christmas.

    It helps to experiment with different colours and find the best colours that work for you.Its also amazing to see how these crystals grow from being as small as sesame seeds to the size of acorns.Dont stay up and watch it though as its like watching paint dry.

    Water Crystals do not only come in different colours but also shapes. There are three main shapes most commonly used. The Pearls, which is probably the most popular, the cubes, and irregular crystals.

    Water Crystals cost less than you think and are ideal gifts for friends and family.They not only provide aesthetics for your home interiors but are functional in supplying a steady stream of water to plants and cut flowers. You dont even have to water your plants as often.The steady stream of water ensures plants and flowers get water as and when they want it and not before and this results in healthy plants and cut flowers that last longer.

    Till Next time

  • Architecture A Brief Introduction and Marketing Tips

    Comments Off on Architecture A Brief Introduction and Marketing Tips
    March 29, 2020 /  Architecture

    Architecture is an art and science that marries the building and design of structures. In some ways one can say that, along with engineering, it is the sign of civilization. Once man was able to settle down and fashion his own dwelling, even by primitive means, this was the start of the first civilizations.

    Originally, these structures were purely functional serving to keep people safe from bad weather and wild animals, and to give them privacy. But as modern construction procedures were developed, along with more advanced materials, architecture and engineering began to take a more artistic leaning.

    The earliest treatise on the subject, De Architectura, was written by Vitruvius, dates back to the 1st Century CE. In it, the Roman architect says that a building has to have form, function, and durability. To this day, most architects still conform to those three tenets. It is probably even safe to say that some are more successful at adhering to those dogmas than others.

    A few examples of these people are Frank Lloyd Wright, a major proponent of organic architecture who is often touted to be the greatest American architect of all time (famous for the house called Fallingwater and for the Guggenheim Museum in New York City); I.M. Pei, a master of modern architecture who created the pyramid at the Louvre and the Bank of China Tower in Hong Kong; Frank Gehry, who designed the Dancing House in Prague; and the landscape architect and artist, Isamu Noguchi, among many others.

    If these names sound familiar to you, it’s probably because their works are admired the world for being beautiful while being both functional and enduring. You’re likely to see their buildings mentioned in architectural texts, art books and even featured in architecture postcard designs. These, by the way, are not only proof of how respected the geniuses mentioned above are but, also function as a way to market their work. Like a portfolio, one might say.

    In fact, some people in the business might publish high quality books that double as coffee table books and company profiles. Or, perhaps, they might have architecture postcard designs and construction postcard designs printed on elegant cards to send to potential clients. Others still, might support these efforts with their own websites.

  • An Initial Introduction To Interior Architecture

    Comments Off on An Initial Introduction To Interior Architecture
    March 22, 2020 /  Architecture

    Interior architecture can be seen as different from architecture in that the interior rooms, halls, doorways + stairs can be re designed once the initial design for the architecture of the building as a whole is in place. Interior architecture can be used to completely re design, for example a room such as a kitchen, bathroom in a family home which is quite common or a meeting room or office layout in a business environment or modify the existing design based on original architecture.

    The interior architecture of a building can be changed for many reasons, either practical, where the interior of a building is going to be used for a new purpose or due to changing fashions or updated technologies. Examples of this are very common in many towns and cities where the exterior of a building is in a style of when it was built, say in the late 19th century but it’s interior has been completely re vamped incorporating modern design fashions and the latest technology.

    The use of interior architecture means that for many buildings over a hundred years old the development of the look and design of their interior and exterior could often be the work of many different architects or teams of architects. This has meant for many of our towns and cities the architecture on view can be widely varied and reflect many different periods of time, design fashions and architecture styles. Some of which can be seen as timeless whilst others from certain eras can be seen as garish and bad taste 20 – 30 years down the line.

    However no matter what a buildings exterior may look like with the help of interior architects, refurbishment and fit out specialists the interior look and feel of many buildings can be totally transformed with enough time and money bringing them up to date, that is until the latest style, fashion and technologies need integrating a few years down the line.

    The main thing to differentiate architecture + interior architecture is that an architect is concerned with the concept of designing a new building the interior architect is concerned with the modification of existing buildings, some of which the design can be seen as timeless and look good for centuries whilst other will be an eye saw and look dated within 10 – 30 years.

    This is quite a large and interesting topic, for further reading would advise looking at books + articles, online, in bookshops, news agents or in libraries on architecture, design + interior design.
    415 Words